Why Choose Unituff (formerly Seal’n’Peel) Coating for Rust Prevention?

Seal n Peel

A Seal‘n’Peel type of protective coating for rust and corrosion prevention is the superior way to temporarily protect non-porous surfaces of metal products, materials, parts, and equipment for prolonged storage against damage due to corrosion deterioration.

The advantages of using Seal‘n’Peel protective coating include:

  • No masking needed.
  • Easy to apply (usually by brush, roll-on, or pressure spray).
  • Easily removed by just peeling off. No chemicals are required to assist removal.
  • Can be applied to almost all types of metals and a wide variety of surfaces.
  • Saving time and money.
  • Extremely flexible.

The common areas of application for seal n peel protective coating include the following industry areas:

  • Automotive
  • Mining machinery
  • Marine
  • Aviation
  • Filming and studio equipment
  • Construction industry
  • Fibreglass industry
  • Metalworks and fabrication
  • Brass, copper, and aluminium protection
  • Spray Booths
  • Signage and advertising
  • Protection of pre-painted metal surfaces
  • Stop-off coating in electroplating
  • Casting moulds

Seal'n'Peel Products

Unituff 452 (formerly Seal’n’Peel)

Unituff 452 is the brush on and roll-on version of the original Unituff Seal ‘n’ Peel family of products. As a protective coating for corrosion prevention, it is used mainly as an external application heavy-duty membrane for protection against corrosion-causing components such as moisture. It is a polyvinyl chloride copolymer solution coating that is very flexible and can be peeled off easily.

Unituff 452 is used on steel, carbon, and aluminium. For stainless steel, another Unituff product is specifically used. The coating can easily be brushed on, dipped, rolled-on, or sprayed by pressure spray or airless sprayer system.

When dried, Unituff 452 appears as a thick silver-coloured adhesive protective coating around any metal. But the tough coating can be easily peeled away when the protection is no longer required after storage. Only 5 minutes of drying time is needed in between each coat. A maximum of three coats is needed.

Unituff 452 is completely non-seeping, meaning that no moisture can penetrate the membrane coating and also prevents rust creep. It is the ultimate barrier for protection. It leaves no residue even when peeling is taking place, so almost no cleaning is required of the metal.

Unituff OGS

Unituff OGS is specially made for use on stainless steel. But it can also be used on mild steel and carbon steel as well.For more information or any testing requirements, please get in touch at sales@omnituff.com or visit the website at https://unituffglobal.com/.