Why Unituff?
Fast Drying and Easy to Apply
You can brush, roll or spray Unituff coatings and within 2 to 3 minutes, it is touch-dry. After 2 or 3 coats you have a barrier against rust.
Where the coating is the rust is not
Unituff coating provide an impermeable barrier to moisture and rust creep. This means once you applied Unituff coatings, you can be sure that your machine metal surface stays a machine metal surface.
Non-residue Coating
No clean up. No sticky mess. No wasted time. This means that your time in the field is optimised.
A corrosion prevention method that truly works.
Thick Silver Adhesive Coating
A thick silver adhesive coating that creates a protective membrane when dried. It forms a tough coating that easily peels away when the protection is no longer required. This product helps you on how to prevent stainless steel from rusting, and as well as other metals and metal components.
Thick Silver Adhesive Coating
A thick silver adhesive coating that creates a protective membrane when dried. It forms a tough coating that easily peels away when the protection is no longer required.
Heavy Duty Impervious
Unituff 452 is a heavy duty impervious, strippable coating for mainly external applications. It acts as a membrane for protection against weather, staining acid and alkalis, water marking, scratching, paint and plaster
Compatible with Mild Steel, Carbon Steel or Aluminium
Unituff 452 should be stirred well first and applied generously.
Apply at least 2-3 coats to the area to be protected.
Allow at least 5 minutes drying time between each coat
Be aware the liquid is highly flammable, so take care with use
It is advised to use in small quantities due to the fast drying properties of this product.
Peelable: Easily peeled away when item is required again
Durable: Ideal for protecting metal items for long periods of time in extreme weather conditions
Fast drying: Saves time and the item is sealed immediately
Non-seepage: Provides the ultimate barrier for protection as no moisture will penetrate
Prevents rust creep
Non-residue: Minimal, if any, cleaning required of the metal item once the Unituff 452 has been peeled away
Flanges and Other Machined Metal Surfaces – Unituff 452
For further testing requirements please contact the Coatings Testing Team at sales@omnituff.com
Glossary of Terms
SSPC-SP1 - SSPC-SP1 Solvent Cleaning.
Flash Point
DFT - Dry film thickness (DFT)
The method of solvent cleaning is intended to remove “all visible oil, grease, soil, drawing and cutting compounds, and all other soluble contaminants from steel surfaces.” The specification calls for the removal of dust before solvent cleaning by the use of a stiff bristle brush.
The flash point is the temperature at which a particular organic compound gives off sufficient vapour to ignite in air.
is the thickness of a coating as measured above the substrate. This can consist of a single layer or multiple layers (Corrosionpedia).
Disclaimer: Since the use and application of this product is beyond our control we cannot be held responsible for product field performance or personnel safety during application and use of product. The information presented in this document is not to be construed as a performance warranty.