Fast Drying and Easy to Apply
You can brush, roll or spray Unituff coatings and within 2 to 3 minutes, it is touch-dry. After 2 or 3 coats you have a barrier against rust.
Where the coating is the rust is not
Unituff coating provide an impermeable barrier to moisture and rust creep. This means once you applied Unituff coatings, you can be sure that your machine metal surface stays a machine metal surface.
No clean up. No sticky mess. No wasted time. This means that your time in the field is optimised.
A corrosion prevention method that truly works.
A thick silver adhesive coating that creates a protective membrane when dried. It forms a tough coating that easily peels away when the protection is no longer required.
Unituff OGS is a peelable, plasticised, permanently flexible polyvinyl resin solution coating. It is a heavy duty coating designed to provide long term protection to a variety of substrates by locking out liquids, dust, gas and vapours. Unituff OGS features an extremely low halogen content making it suitable for the temporary protection of stainless steel. When used as stand alone peelable protective coating in normal atmospheric exposure Unituff OGS will protect the substrate for a minimum of 6 months. When used in conjunction with the complete 4VAP system Unituff OGS will protect the substrate for many years and will be readily peelable when required.
Compatible with Stainless Steel, Brass and other Alloys.
Protection of equipment during transport and storage. “Mothballing”. Military Equipment Tooling, Mining Equipment, Heavy industrial machinery, Castings, Architectural componentry, Stainless Steel.
Be aware the liquid is highly flammable, so take care with use.
It is advised to use in small quantities due to the fast drying properties of this product.
- Fast drying
- Prevents rust creep
Glossary of Terms
SSPC-SP1 - SSPC-SP1 Solvent Cleaning.
DFT - Dry film thickness (DFT)
The method of solvent cleaning is intended to remove “all visible oil, grease, soil, drawing and cutting compounds, and all other soluble contaminants from steel surfaces.” The specification calls for the removal of dust before solvent cleaning by the use of a stiff bristle brush.
The flash point is the temperature at which a particular organic compound gives off sufficient vapour to ignite in air.
is the thickness of a coating as measured above the substrate. This can consist of a single layer or multiple layers (Corrosionpedia).
Disclaimer: Since the use and application of this product is beyond our control we cannot be held responsible for product field performance or personnel safety during application and use of product. The information presented in this document is not to be construed as a performance warranty.